90s1323的inc文件：2313def.inc；
;***************************************************************************
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
;*
;* Number :AVR000
;* File Name :"2313def.inc"
;* Title :Register/Bit Definitions for the AT90S2313
;* Date :97.12.11
;* Version :1.20
;* Support telephone :+47 72 88 87 20 (ATMEL Norway)
;* Support fax :+47 72 88 87 18 (ATMEL Norway)
;* Support E-Mail :avr@atmel.com
;* Target MCU :AT90S2313
;*
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register
;* names and I/O register bit names appearing in the data book can be used.
;*
;* The Register names are represented by their hexadecimal addresses.
;*
;* The Register Bit names are represented by their bit number (0-7).
;*
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;*
;* in r16,PORTB ;read PORTB latch
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out PORTB,r16 ;output to PORTB
;*
;* in r16,TIFR ;read the Timer Interrupt Flag Register
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
;* rjmp TOV0_is_set ;jump if set
;* ... ;otherwise do something else
;***************************************************************************
