:em05: A5水上飞机外形很好看，见了之后一直有制作的冲动。
上次的水机成功飞行之后，忍不住乐呵呵:em05: :em05: :em05: 于是再次操刀，把A5完成。
根据网上找的简单三面图，作了一些修改，希望模型能更好做好飞些：1、增长尾力臂，2、加大尾翼面积，3、圆形机身改矩形，4、二个机身浮筒加宽······改动还不小，，，:em05: 看来算不上像真机了:em17: :em17: :em17:
制作过程如下，，，，，，
骨架··················
底部特写·······················
上部骨架····························
机身完成·····························
上腻子，就是原子灰，打磨后增加了45克·····························
然后喷漆，喷了5遍，重量只增加8克，哈哈哈不错···························
制作机翼，泡沫加轻木蒙皮·······························
可乐罐做的整流罩······························
制作完成，耗时3周晚上时间:em17: :em03: :em24: ·······································
大家看像不像啊:em15:
和大哥合影一张，茄子:em15: ·······························
|
/1 
发表于 2008-12-4 18:39
收藏
楼主