Arduino XBee Pro 900 U.FL Connection Zigbee10公里传输无线数传模块
Xbee模块是采用ZigBee技术的无线模块，通过串口与单片机等设备间进行通信，能够非常快速地实现将设备接入到ZigBee网络的目的。 XBee Pro 900 U.FL Connection sku: WRL-09098
Description:The XBee-PRO 900 RF module is ideally suited for low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, the XBee-900 is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application.
As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digi’s Drop-in Networking solutions including gateways and adapters. No configuration is necessary for out-of-the-box RF communications. The module’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple serial AT commands.
XBee-PRO modules operate within the ISM 900 MHz frequency band. The modules are optimized for use in US and Canada.
Digi Part #: XBP09-DPUIT-156
Features:
- 3.3V @ 210mA
- Fast 156 Kbps RF data rate
- 50 mW (+17 dBm) power output
- Up to 6 miles (10 km) RF LOS with high gain antennas
- Point-to-multipoint networking ideal for low-latency applications
- Support for large, dense networks
- 128-bit AES encryption
- ISM 900 MHz operating frequency
- U.FL connector
- Industrial temperature rating (-40° C to +85° C)
- Advanced mesh networking and low-power modes supported
- Approved for use in the United States and Canada
Documents:
- Digi XBee Pro 900 Page：[url=]http://www.digi.com/products/wireless/point-multipoint/xbee-pro-900.jsp[/url]
- Datasheet：[url=]http://www.sparkfun.com/datasheets/Wireless/Zigbee/XBee-900-Datasheet.pdf[/url]
- Product Manual：[url=]http://www.sparkfun.com/datasheets/Wireless/Zigbee/XBee-900-Manual.pdf[/url]
- Dimensional Drawings：[url=]http://www.sparkfun.com/datasheets/Wireless/Zigbee/XBee-Dimensional.pdf[/url]
- X-CTU:http://www.maxstream.net/support/xctu/setup_x-ctu.exe
不知道兼容FY遥控转接板不？
哪位高手能做一个也不胜感激~~！！！！！！ | 
/1 
发表于 2011-3-3 09:56
收藏
楼主
