5iMX宗旨:分享遥控模型兴趣爱好

5iMX.com 我爱模型 玩家论坛 ——专业遥控模型和无人机玩家论坛(玩模型就上我爱模型,创始于2003年)
查看: 4434|回复: 33
打印 上一主题 下一主题

传说中的舵机

[复制链接]
跳转到指定楼层
楼主
发表于 2010-12-31 13:54 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
不是大家猜测的JR舵机,在广州很少飞大JJ了,实在不想开车出去2个小时才能找到一片乱嘈嘈的石头地去飞,没有了大草地,蓝天的陪衬,感觉都寂寞了很多:em23:
现在飞的很少 工作实在太忙,万恶啊:em17:
春 节正好有时间,准备把老机器拿出来更新更新
DS95 正好刚刚拿到,用来升级使用了好多年的HITEC 65MG

陆续还订了一些其他的设备 这1-2天也会到齐:em15:

[ 本帖最后由 simplelifee 于 2011-1-5 19:42 编辑 ]

DS95.JPG (141.33 KB, 下载次数: 13)

DS95.JPG

450-1.JPG (58.63 KB, 下载次数: 11)

450-1.JPG

欢迎继续阅读楼主其他信息

主题

  • 没有相关信息
  • 没有相关信息
  • 没有相关信息
34
发表于 2011-1-25 09:22 | 只看该作者
好帖
33
发表于 2011-1-6 12:10 | 只看该作者
:em07: :em07:
32
发表于 2011-1-5 21:58 | 只看该作者
观望
31
发表于 2011-1-5 21:24 | 只看该作者
ture say. that's why i only stock the kits as a collection without assembling and flying them. in this case i don't need to worry about the parts supply at all:em15: , with the exception of N9:em25: ...
30
发表于 2011-1-5 20:10 | 只看该作者
原帖由 ebulahan 于 2011-1-5 11:16 发表
I inputted in english because the topic we discussed is involved with the websites and vendor infomation, which is prohibited here


:em15::em15::em15:

Lot of laugh man......

Regarding to buy the latest kits and parts, you are right man, that's also the reason why I've got most of my kits locally from Oz or from Japan, I used to buy some cheap stuff from Taobao a couple of years ago and to be frank, I've got a few good experiences but most of them are bad, you never know what sort of quality or revision you gonna get before the parcel hits your door step.

Another reason for buying from Japan, actually it's the big reason for those who fly the Japanese machine, is the parts availability, it's relatively hard to get parts from Oz or even from US for some model. I can easily access parts locally for JR Vibe or Hirobo D3/SDX, but I have no way to get parts for Kyosho Carlibre or JR Airskipper etc, simply due to not many people fly these machines, I have seen so many people stock parts whenever they can if they want to fly an 'unpopular' helicopter, specially those who fly F3C machines. You can get whatever parts you want from Japanese on-line shop easily, and sometimes it's the only way to get parts for very old / even out-of-production helicopters.

Watch for specials from these shops as well, you will find some surprisingly good deal time to time.

Enjoy!

Sean
29
发表于 2011-1-5 18:35 | 只看该作者
遥控器还是电位的舵机就霍尔了
28
发表于 2011-1-5 13:03 | 只看该作者
依然在观望 :em04:
27
发表于 2011-1-5 11:16 | 只看该作者
Thanks again Xuesing. I've browsed the two sites u gave me and I surprisingly noticed that Linear Hall Sensing series got their prices and specifications announced. Here is the comparison between them and the HV serires, check it out. IMO, MPH81G could be a perfect substitute of 8900G tail servo. However, they're still unavailable in the market. For those who are chasing the lifespan of a cyclic servo, MPH81S is recommemded to replace BLS253 since the spec. are almost the same, yet the price is about 35 bulks higher.
One sad thing is that I did not find any info. about the JR Vibe 90 SG on both websites and the D3 is a little bit more expensive there than on Taobao. However I insist to buy these kits from either Japan or US because of the guaranteed quarlity and service, and nearly 0 probability of getting cheated. In addtion, once the manufacturer makes some modification or updates, the kits there should always be up to date(for instance, the new Vibe 90 SG kit now comes with a pre-painted canopy). Just imagine that if you buy it from Taobao, most likely, you'll get an old version with a raw canopy and you gotta glue the decals urself. I inputted in english because the topic we discussed is involved with the websites and vendor infomation, which is prohibited here:em19:
Cheers

[ 本帖最后由 ebulahan 于 2011-1-5 13:17 编辑 ]

123.JPG (69.03 KB, 下载次数: 5)

123.JPG
26
发表于 2011-1-5 11:13 | 只看该作者
:em04: :em04: :em04:

[ 本帖最后由 菠萝 于 2011-1-5 11:15 编辑 ]
25
发表于 2011-1-2 23:35 | 只看该作者
:em20: :em20:
24
发表于 2011-1-2 23:25 | 只看该作者
原帖由 ebulahan 于 2011-1-2 22:43 发表

非常感谢!我3月份应该会入手D3,到时候看看能不能从日本买


No worries, enjoy!
23
发表于 2011-1-2 22:43 | 只看该作者
原帖由 xuesing 于 2011-1-2 22:04 发表
日本的ISHIMOKI和RCCHAMP都是ship to worldwide的, 国外很多人买日系机的配件都是通过这些店买, 什么配件都能买到, 很方便

非常感谢!我3月份应该会入手D3,到时候看看能不能从日本买
22
发表于 2011-1-2 22:04 | 只看该作者
[quote]原帖由 ebulahan 于 2011-1-2 21:14 发表
另外,我X本还真没有什么朋友。不过这个应该不是大问题。真要想买,怎么都会有办法的。不过我应该不会一上市就去买,毕竟电子产品刚上市的时候都是死贵死贵的。。。顺便等等广大勇于尝试新东西的用户的评论再说:em15 ... [/quot

日本的ISHIMOKI和RCCHAMP都是ship to worldwide的, 国外很多人买日系机的配件都是通过这些店买, 什么配件都能买到, 很方便
21
发表于 2011-1-2 21:15 | 只看该作者


是这个吧?
20
发表于 2011-1-2 21:14 | 只看该作者
另外,我X本还真没有什么朋友。不过这个应该不是大问题。真要想买,怎么都会有办法的。不过我应该不会一上市就去买,毕竟电子产品刚上市的时候都是死贵死贵的。。。顺便等等广大勇于尝试新东西的用户的评论再说:em15:
19
发表于 2011-1-2 21:08 | 只看该作者
原帖由 xuesing 于 2011-1-2 13:16 发表


MPH81系列在国外我还没有看到有卖的, 不过这东西往往是日本先发卖, LZ在日本有朋友所以他如果已经买到很有可能, 不过LZ一直没上来说说他买的传说中的舵机的具体情况阿。。。。。

RCCHAMP我没有看到广告,但 ...

说的很有道理:em26:
另外,FUTABA的东西很好,只是我的611+bls251无故罢工两次让N9炸了,随后又找不到原因。所以想试试JR的东西。买8717HV之前其实我就考虑过它的电机是有寿命的。不过正如你所说的,电位器的磨损不容忽视。8717HV的空心杯看来没什么不妥。估计等碳刷磨完时,电位器也差不多了。
我想了想,影响舵机精度和寿命的因素太多了。就算电机、电位器的寿命问题解决后,金属齿轮的磨损也不容小视。所以8717HV才从8717的普通金属齿轮升级为超级钢。所以目前来说,我觉得不必太追求舵机的寿命,而应该多看中舵机在寿命之内的性能表现。希望霍尔舵机能够真正带来一次寿命上的革命!
18
发表于 2011-1-2 18:54 | 只看该作者

中 国早就生产出来无电位器的舵机了!

不过目前只外销看看老外的反应如何。下一步再内销。

中国生产的无电位器的舵机.JPG (37.43 KB, 下载次数: 15)

中国生产的无电位器的舵机.JPG

蓝箭的无电位器舵机.JPG (26.32 KB, 下载次数: 13)

蓝箭的无电位器舵机.JPG
17
发表于 2011-1-2 18:28 | 只看该作者
上图啊到了没
16
发表于 2011-1-2 13:32 | 只看该作者
:em15: :em15: :em15:
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

关闭

【站内推荐】上一条 /1 下一条

快速回复 返回顶部 返回列表