401陀螺仪想直接接2s有好办法吗

四驱改

我想用8.4的舵机，接收机倒是可以最高支持16v但我手里有个401想用，有没有什么好办法？单独接个ubec给陀螺仪？

neosunrise

FUTABA GY401 GYRO SPECIFICATIONS
Type: Micro Heading Hold Gyro
Sensor: SSM AVCS
Weight: 27 grams (0.95 oz)
Dimensions (WxLxH): 27 x 27 x 20mm
Gain Setting: Remote Only
Mode Setting: Rate or Heading Hold – Remote Only
Operating Voltage: 4.8 VDC (Needs a voltage regulator (6 VDC) if using higher than 4.8v battery packs) 标称电压4.8V，你8.4V直驱几乎翻倍了，还是悠着点用独立BEC吧。
Reversing Switch: Yes, on gyro
Limit Trimmer: Yes, adjustment on gyro
High/Low Frequency Rate Selectable Switch on Gyro (Analog and Digital Servos Support)

铁翼雄心

我有一个PG800陀螺
好像支持2S直驱

四驱改

neosunrise 发表于 2017-1-25 13:58
FUTABA GY401 GYRO SPECIFICATIONS
Type: Micro Heading Hold Gyro
Sensor: SSM AVCS

哈哈还帮我找了资料 谢谢 看来如果想用8.4舵机 得接个ubec了